Flow Regulators – Aerators and In line Controllers
3E Water Solutions Pty Ltd has a range of both Aerator and In Line flow regulators in a range of flow rates depending on the application. A basins flow rate can be reduced from 15 lpm to just 4 lpm without upsetting the performance of the appliance. This is a saving of 73% of water currently used. Other sizes include 8 lpm, 9 lpm and 12 lpm. Both Aerators and In Line Flow Regulators available in most configurations

These can be fitting to an existing or new tap with an aerated outlet. It will reduce the amount of water flowing without affecting the outlet pressure. These aerators are available in 4, 6 or 8 litre per minute flows, in comparison to an average of 28 litres per minute from a standard tap. A saving of over 85%.
* Available in 4, 6, and 8 litre per minute flow
* Easily fitted to existing taps
* Up to 85% water reduction
* No affect on water pressure
* Up to AAA rating
Technical Information:
Disc: Acetal Polyoxymethylene Copolymer
Performance Standard to ANSI/NSF Standard 14: ASTM D4181 POM 213
Deflection temperature, 110° at 1.82MPa
O-Ring: Food grade rubber
70 Shore Durometer in accordance with AS3688
Deflection temperature, 110° at 1.82MPa
Body: DR Brass Chrome Plated in accordance with AS3688



Inline Flow Controllers
These are designed to be easily fitted between a wall and outlet and a shower head, or inline between the wall outlet and tap body. These actively reduce the amount of water flowing from the outlet without affect outlet pressure.
These Inline Flow Controllers provide water flow by constricting the water to flow through a fixed opening. The secondary flow control method is through the use of an O-Ring.
* Available in 4, 6, 9 and 12 litre per minute flow
* Easily fitted to existing taps
* Up to 85% water reduction
* No affect on water pressure
* Up to AAA rating
Technical Information:
Disc: Acetal Polyoxymethylene Copolymer
Performance Standard to ANSI/NSF Standard 14: ASTM D4181 POM 213
Deflection temperature, 110° at 1.82MPa
O-Ring: Food grade rubber
70 Shore Durometer in accordance with AS3688
Deflection temperature, 110° at 1.82MPa
Body: DR Brass Chrome Plated in accordance with AS3688


Flow Control Discs
These can be fitted to an existing or new tap or shower head to reduce the amount of water flowing from the outlet. They are available in 6, 9 or 12 litre per minute versions, when in comparason to 28 litres per minute, that is a saving of up to 75%.
The Flow Control Discs operate with the use of an O-Ring which reacts against the flow by unseating and slowly reducing the flow capacity over the opening until maximum reduction is achieved.
* Available in 6, 9, and 12 litre per minute flow
* Easily retrofitted to existing fittings and fixtures
* Up to 75% water reduction
* No affect on water pressure
* Up to AAA rating
Technical Information:
Disc: Acetal Polyoxymethylene Copolymer
Performance Standard to ANSI/NSF Standard 14: ASTM D4181 POM 213
Deflection temperature, 110° at 1.82MPa
O-Ring: Food grade rubber
70 Shore Durometer in accordance with AS3688
Deflection temperature, 110° at 1.82MPa



Toilet Water Saver
Millions of litres of fresh drinking water is being flushed down the toilet by older single flush toilet cisterns. The Toilet Water Saver is designed to give control over the duration of the flush and are fitted in minutes. The Toilet Water Saver can save up to 30,000L per year in a 4 person home.
* Quick and Simple to install
* Up to 70% Water Usage Reduction
* Fits all cisterns with open overflows
The Toilet Water Saver fits into the open overflow of single flush toilets causing the toilet to only flush whilst the flush button or lever is held down.



Aerator Service Tool
Designed to fit almost any tap aerator. This tool will greatly reduce the effort required to remove and install tap Aerators, while protecting the aerator from damage when using a regular spanner or multigrip.
* Fits almost any tap aerator body
* Strong and Durable Thermoplastic, wont corrode.



M+F Inline Flow Controllers
We have a range of 3⁄4 inch M+F inline flow controllers which are available for various applications such as outside bib taps, water tank top up or copper pipes that are in 3⁄4" copper as opposed to the standard 1⁄2" copper. M+F Inline Flow Controllers are available in 3,4,6,8,9 and 12 litre per minute flow rates. All 3⁄4" M+F inline flow controllers are manufactured in Australia using DR brass and are certified to Australian Standard AS3688 and AS/NZS6400.


Flow Regulated Copper to Copper Unions
For older style applications involving copper plumbing, flow regulated copper to copper unions with compression nuts or nylon olives provide a water saving solution for all plumbers. These are available in 4, 6 and 9 litre per minute flow rates and are supplied in pairs, bulk packs and mixed packs as needed. Copper to Copper unions are supplied in either DR brass or chrome plated, DR brass for visible applications. All Copper to Copper Unions are manufactured in Australia and are certified to Australian Standard AS3688 and AS/NZS6400.



Jet Sprays
There are 8 litre per minute high pressure aerators available for use in industrial kitchens and labs where high pressure is required to perform specific tasks such as rinsing and excess product removal.
There are also 2 litre per minute Jet Sprays available for use in public hand basins. Our 2 litre aerators ensure quality hand washing whilst saving up to 80% in water usage.



Mini Disc Inserts
This product is designed to be fitted inside tapware and provide compliance to Australian Standards and the new WELS scheme.
Mini discs are available in 4.5, 6 and 9 litre per minute flow rates.